Improve Radiator Inlet 1.Failure and analysis Engine "reflow" generally refers to that a large amount of gas is generated inside the engine, which causes a large amount of coolant to ove...
Generator High Temperature Solutions The main reasons for the high temperature of diesel generators are as follows: 1.Improper selection of coolant or insufficient amount of water will cause th...
What is the reason for unstable engine speed? What about the solution? Usually, this is caused by the leakage of the intake system and valves, excessive scaling of the throttle valve and intake pipe, ...
What is the reason for the insufficient power of the diesel engine? How to solve it? 1.Faulty injector Injector faults are generally divided into mechanical faults and wiring faults. Mechanical...
Excavator classification The ordinary excavator is driven by internal combustion engine and electric power. Electric excavators are mainly used in flammable and explosive places such as plateau hypoxi...
Sensor composition 1.Sensitive element: the element that directly senses the measured object and outputs other quantities that have a certain relationship with the measured object. Not all measured no...
What are the commonly used generator sensors? A sensor that converts the rotational speed of a rotating object into an electrical output. The speed sensor is an indirect measuring device, which can be...
Cummins generator sensor type Sensors are classified as temperature, oil pressure, combined type, speed and position sensors 1.Coolant temperature sensor The sensor is located on the front righ...
What are the differences and connections between transmitters and sensors? Sensor is the general name of devices or devices that can be measured and converted into usable output signals according to c...
Explanation of common sensor performance terms Pressure sensor performance terminology ● Thermal sensitivity drift The change of sensitivity caused by the sensor operating temperature deviating from t...
Watertemperature sensor function of dieselunit 1.Modify the fuel injection amount; increase the fuel injection at low temperature; 2.Correct the ignition advance Angle; increase the ignition advance A...
